Form Factor Stand/Boom-Mount
Sound Field Mono
Operating Principle Line Gradient
Capsule Electret Condenser
Diaphragm 0.5″ / 12.70 mm
Polar Pattern Supercardioid
Orientation End Address
Circuitry Solid-State (JFET)
Pad None
High-Pass Filter 80 Hz
Tone Adjustment None
Gain Adjustment -10 dB to +20 dB
Indicators 1 x Single LED (Power)
On-Board Controls Gain, High-Pass Filter, On/Off
Windscreen Foam (Included)
Performance
Frequency Range 40 Hz to 20 kHz
Maximum SPL 134 dB SPL
Off-Axis Rejection 2 dB at 60°
18 dB at 120°
10 dB at 180°
Impedance 200 Ohms
Sensitivity -32 dBV/Pa at 1 kHz
Output Level 6.9 dBu (Max)
Dynamic Range 120 dB
Signal-to-Noise Ratio 80 dB
Equivalent Noise Level 14 dB A-Weighted
13,750 EGP
Rode’s Boompole provides up to 10′ of extension for shotgun microphones. The pole uses a 3/8″ industry-standard thread and is designed to fit SM3 Shockmounts, RMS Stand Mounts (NT5, NTG1 & NTG2), and VideoMic. The five-section pole collapses down to 33″ for easy portability.
| Acoustic Principle | Line Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.50″ |
| Polar Pattern |  |
| Address Type | End |
| Frequency Range | 40Hz – 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 134dBSPL |
| Sensitivity | -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 20dBA |
| Power Options | |
| Weight | 176.00g |
| Dimensions | 65.00mmH x 102.00mmW x 250.00mmD |
| Output | |
| Acoustic Principle | Line Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.55″ |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 20Hz – 20kHz (selected HPF @75Hz/150Hz) |
| Output Impedance | 200Ω |
| Maximum SPL | 133dBSPL |
| Maximum Output Level | 7.7dBu (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -33.6dB re 1 Volt/Pascal (21.20mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 14dBA |
| Power Options | |
| Weight | 122g |
| Dimensions | 111mmH x 66mmW x 170mmD |
| Output | |
