1/4" & 1/8" Mics, Samson Audio
Samson R31s ? 1/4? Dynamic Mic
- Ideal for live vocals and instruments
- Shock mounted mic element
- Hypercardioid pickup pattern
- High gain output, low impedance design
- 50Hz–15kHz frequency response
- On/Off switch
- XLR to 1/4″ mic cable
- Mic clip included
1,400 EGP
Related products
-
Mixers, Samson Audio
Samson MD1 Pro
0 out of 5(0)- All-metal, impact resistant design
- Samson STLX Mu-Metal shielded transformer
- 3-position 0dB/-15dB/-30dB attenuation switch
- Ground Lift switch
- 1/4″ Input and Thru
- Balanced XLR output
- No Phantom or Battery power required
- Frequency response of 18Hz–40kHz
SKU: 0708014,500 EGP -
Samson Audio, Wireless Systems
Samson AirLine Guitar AF1
0 out of 5(0)AF1/AG1 Transmitters feature:
- Standard 1/4-inch plug
- Power/Battery LED
- Power switch
- 15dB pad switch
- Operate on single AAA battery
AP1 Pedal Receiver:
- Power switch and level control
- Power On/Low Battery LED indicators as well as TX/Peak LEDs
- Dual swivel mounting antennas for optimum positioning
- 1/4-inch unbalanced output jack
- DC input
- Squelch control
Consumer Alert
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.SKU: 07010114,000 EGP -
Samson Audio, Samson Speakers / PA Systems, Speakers / PA Cabinets
Samson ?Auro D1500
0 out of 5(0)- Lightweight, compact Class D active subwoofer, weighing just over 50lb
- 15″ long excursion low frequency driver
- 2.5″ voice coil
- 1,000 watts of output power
- Balanced XLR-1/4″ combo inputs
- Unbalanced stereo RCA inputs
- Stereo XLR high pass filter outputs
- Additional parallel full range XLR outputs
- Signal, Limiter and Protect LED indicators
- Variable low pass filter control (balance control when used with high pass outputs)
- 3-position (Normal, Deep, Boost) DSP contour control
- Polarity switch
- Solid 5/8″ plywood enclosure with textured paint finish
- Integrated 1 3/8″ pole mount receptacle
- Two large ergonomic carry handles
SKU: 07050140,000 EGP